High Point, NC
Surplus Forklift Buyers in High Point, NC
Idle equipment is dead capital. It depreciates, it takes floor space, and it still gets audited. High Point is an established industrial and commercial center, which means forklifts here get retired for every reason there is: a fleet upgrade, a plant consolidation, a lease ending, or a transmission that finally let go. Whatever the reason, we quote it in 24 hours and pay cash when we pick it up. Nothing is deducted from the number for freight or rigging.
Monday – Saturday, 7:00 AM – 7:00 PM ET · No fees, no commissions, free pickup.

Every type of lift truck, High Point included
Our scope is forklifts and the material handling equipment that lives beside them — nothing else. In High Point and Guilford County that means multi-directional, sit-down rider, container handler, walkie stacker, ic pneumatic, electric counterbalance, plus electric pallet jacks, walkie stackers, order pickers, and telehandlers. If it lifts pallets, we are interested.
We buy every major nameplate: Doosan, Big Joe, Genie, SkyTrak, Crown, Nissan / UniCarriers, Landoll, Combilift, and the rest. Brand matters to the offer, but far less than hours, mast condition, and whether the truck runs. A high-hour Toyota with a tired mast can be worth less than a low-hour Doosan that has been maintained.
Capacity range runs from 2,000 lb walkies up through 40,000 lb+ container handlers. The classes we see most often in High Point are 4,000 lb, 3,000 lb, 15,000 lb, 8,000 lb. Searches like "surplus material handling buyers" and "excess forklift inventory buyers" all land in the same place: send the specs, get a number.
Have the make, model, and hours handy? One call is usually all it takes.
(954) 740-1983What happens after you call us from High Point
First, the specs. Make, model, year, hour meter, fuel type, capacity, and mast configuration. Then photos: all four corners, the mast fully lowered, the data plate, and the hour meter. That is genuinely all we need to price a truck in High Point.
Second, the offer. We price against live wholesale, export, and auction comparables rather than a rule of thumb, and you get a firm number in writing inside 24 hours — usually the same business day if you reach us during working hours. The offer is firm. We do not quote high to win the call and then re-negotiate at the dock.
Third, pickup and payment. We schedule transport at our cost, our driver loads it, and you are paid at the time of pickup. For High Point that usually means a pickup window within a few business days, since we already run this corridor.

What your forklift is worth in High Point
Five things move the number, in roughly this order: hour meter, mast and carriage condition, powertrain health, tires, and attachments. On electrics, battery age and capacity replace powertrain — a truck needing a new lead-acid pack can be several thousand dollars behind an identical unit with a healthy, recently load-tested battery.
We grade A through D and we say the grade out loud. Grade A is starts cold, lifts and tilts to full height under load, no active hydraulic leaks, tires and mast in good order, hour meter working and consistent with the machine's appearance. Grade D still gets an offer, because core, component, and scrap value is not the same as worthless.
Nobody can quote a forklift accurately from a city name alone, and any site that gives you a firm price before seeing the machine is guessing. What we will commit to is the range in the table on this page, a real number within 24 hours of seeing your specs, and no reduction of that number at pickup. Call (954) 740-1983 and we will walk through your truck.
Getting it out of your building in High Point
We cover High Point and roughly 71 miles around it, including Greensboro, Winston-Salem, Burlington, Kannapolis. Freight is on us. You do not rent a lift to load a lift, and you do not chase a driver who never shows.
Access is the only thing we need to know in advance. Tell us whether the truck rolls or has to be dragged, whether it is on a dock or on a slab, whether the ceiling clears a mast, and whether there is room for a 48-foot trailer. Non-running units are routine — we bring winches for exactly that.
Single units and small lots get scheduled around your operation, including after-hours and weekend loading when a plant cannot give up the dock during production.
What it is worth
Forklift values by capacity in High Point
Wide, honest bands rather than false precision. Hours, mast, tires, battery health, and whether the truck runs decide where a specific machine lands inside its band.
| Capacity | Typical Configuration | Common Use | Cash Range |
|---|---|---|---|
| 3,000 lb | Electric three-wheel, walkie stacker, compact cushion | Retail backrooms, light assembly, small stockrooms | $1,500 – $12,000 |
| 4,000 lb | Electric counterbalance, reach truck, cushion tire | General warehousing, racked storage, light manufacturing | $2,000 – $16,000 |
| 5,000 lb | LP cushion, IC pneumatic, sit-down rider | The default workhorse across nearly every industry | $2,500 – $20,000 |
| 6,000 lb | IC pneumatic, LP cushion, diesel counterbalance | Distribution, lumber, building supply, dock work | $3,000 – $24,000 |
| 8,000 lb | Diesel or LP pneumatic, heavier cushion trucks | Steel, concrete products, heavy distribution, ports | $4,000 – $30,000 |
| 10,000 lb | Diesel pneumatic, dual-tire IC counterbalance | Manufacturing, lumber yards, marine, pipe handling | $5,000 – $38,000 |
| 15,000 lb | Heavy diesel counterbalance, mill-duty trucks | Steel service centres, paper, heavy fabrication | $8,000 – $52,000 |
| 20,000 lb | High-capacity diesel, Taylor / Hoist / Kalmar class | Steel, marine, precast concrete, heavy industry | $12,000 – $75,000 |
| 30,000 lb | Heavy mill-duty forklift, loaded container capable | Ports, steel mills, heavy manufacturing, rail yards | $20,000 – $110,000 |
| 50,000 lb and up | Container handler, reach stacker, super-heavy forklift | Intermodal terminals, ports, steel mills, shipyards | $35,000 – $300,000 |
Condition grading
How we grade a forklift, A through D
Grade it honestly and the offer holds at pickup. We would rather quote a Grade C truck correctly than quote a Grade A number we have to walk back on your dock.
| Grade | Meaning | What It Looks Like | Effect On Offer |
|---|---|---|---|
| A | Ready to Work | Starts cold, lifts and tilts to full height under load, no active hydraulic leaks, tires and mast in good order, hour meter working and consistent with the machine's appearance. | Top of our range |
| B | Running, Needs Minor Work | Runs and lifts but has identifiable minor issues — a seeping cylinder, worn tires, tired battery, cosmetic damage, a non-functioning gauge, or deferred maintenance. | Moderate reduction from top |
| C | Runs Poorly or Lifts Poorly | Starts but runs rough, will not lift to full height, has a significant hydraulic or transmission fault, a failed battery pack, or unknown recent service history. | Substantial reduction |
| D | Non-Running, Scrap, or Incomplete | Will not start, seized engine or drive unit, major structural damage, stripped of components, sat outdoors for years, or already partially dismantled. | Core, component, and scrap value |
How it works
Selling a forklift in High Point, step by step
Send the specs
Make, model, year, hours, fuel type, capacity, and mast. Photos of the four corners, the mast, and the data plate. Call it in or use the form.
Get a cash offer in 24 hours
We price against live wholesale and auction data, not a guess. You get a real number, in writing, usually the same day.
We pick it up and pay
We schedule the rigging and transport at our cost and you are paid at the time of pickup. No fees taken out of the number.
Why sell to us
Why High Point sellers deal with us directly
Why Sell To Us
Four reasons sellers stop shopping and just call
No listing, no waiting
You are not posting an ad and hoping. You are selling directly to the buyer who writes the check.
No commissions, no fees
Brokers take a cut of your sale price. We are not brokers. The number we quote is the number you receive.
Cash offer within 24 hours
Send the specs and photos today and you will have a real number back inside one business day, usually much sooner.
We handle the pickup
Rigging, loading, and transport are ours to arrange and ours to pay for. You do not rent a forklift to load a forklift.
Questions
High Point, NC forklift questions, answered
- Do you buy forklifts in High Point that do not run?
- Yes. Non-running, seized, flood-damaged, and stripped units are a routine purchase. The mast, counterweight, transmission, hydraulics, and steel all hold value, so a dead forklift in High Point is still worth a real number rather than a disposal fee.
- Do you buy pallet jacks and other material handling equipment in High Point?
- Yes, within our lane: electric pallet jacks, walkie stackers, reach trucks, order pickers, telehandlers, and forklift attachments. We are forklift specialists and we do not buy outside material handling.
- How much is my forklift worth in High Point?
- Most units in this market fall between $35,000 and $300,000 for a 50,000 lb and up class truck, with hours, mast condition, powertrain, and battery health deciding where yours lands. We will give you a firm number for your specific machine inside 24 hours.
- Who buys used forklifts in High Point?
- We do, directly. Forklifts Buyers is a cash buyer rather than a broker or a listing site, so the company that quotes your truck in High Point is the same company that pays for it and hauls it away. Call (954) 740-1983 with the make, model, and hours.
- Can you buy a narrow aisle forklift in High Point?
- Yes. Purpose-built to work aisles too tight for a counterbalance truck. We buy them in High Point at every grade, from turn-key to non-running, in the 3,000 – 5,000 lb range.
- How fast can I get a cash offer on a forklift in High Point?
- Within 24 hours of receiving your specs and photos, and often the same business day if you call during working hours (Monday – Saturday, 7:00 AM – 7:00 PM ET). Pickup in High Point is normally scheduled within a few business days after you accept.
- What information do you need to quote a forklift in High Point?
- Make, model, year, hour meter reading, fuel type, lift capacity, mast type, and honest condition notes, plus photos of the four corners, the lowered mast, the data plate, and the hour meter. That is enough to price it accurately without a site visit.
- What areas around High Point do you cover?
- High Point plus the surrounding South corridor, including Greensboro, Winston-Salem, Burlington, Kannapolis. If your location is not listed, call (954) 740-1983 — we route nationwide and almost certainly cover you.
Ready for a number on your High Point forklift?
Call (954) 740-1983 or send photos and specs. Either way you get a firm cash offer within 24 hours and we handle the pickup.
Nearby cities we buy forklifts in
- Surplus Forklift Buyers in Greensboro, NC
- Surplus Forklift Buyers in Winston-Salem, NC
- Surplus Forklift Buyers in Burlington, NC
- Surplus Forklift Buyers in Kannapolis, NC
- Surplus Forklift Buyers in Concord, NC
- Surplus Forklift Buyers in Chapel Hill, NC
- Surplus Forklift Buyers in Huntersville, NC
- Surplus Forklift Buyers in Durham, NC
- Surplus Forklift Buyers in Apex, NC
- Surplus Forklift Buyers in Charlotte, NC
- Surplus Forklift Buyers in Cary, NC
- Surplus Forklift Buyers in Hickory, NC