High Point, NC
Forklift Removal in High Point, North Carolina
We arrive with the right trailer and rigging, load it, and leave the floor clear. Between the warehousing and distribution in and around High Point and the fact that this is an established industrial and commercial center, there is no shortage of lift trucks reaching the end of their service life here. We buy them outright. No consignment, no commission, no waiting for someone else's financing to clear.
Monday – Saturday, 7:00 AM – 7:00 PM ET · No fees, no commissions, free pickup.

What qualifies in High Point
Our scope is forklifts and the material handling equipment that lives beside them — nothing else. In High Point and Guilford County that means pallet jack, gasoline, reach truck, side loader, attachments, diesel, plus electric pallet jacks, walkie stackers, order pickers, and telehandlers. If it lifts pallets, we are interested.
We buy every major nameplate: Crown, Big Joe, Landoll, Clark, Mitsubishi, Hyster, Genie, Caterpillar, and the rest. Brand matters to the offer, but far less than hours, mast condition, and whether the truck runs. A high-hour Toyota with a tired mast can be worth less than a low-hour Doosan that has been maintained.
Capacity range runs from 2,000 lb walkies up through 40,000 lb+ container handlers. The classes we see most often in High Point are 3,000 lb, 20,000 lb, 5,000 lb, 10,000 lb. Searches like "forklift removal service" and "forklift removal same week" all land in the same place: send the specs, get a number.
Have the make, model, and hours handy? One call is usually all it takes.
(954) 740-1983Three steps from specs to cash in High Point
First, the specs. Make, model, year, hour meter, fuel type, capacity, and mast configuration. Then photos: all four corners, the mast fully lowered, the data plate, and the hour meter. That is genuinely all we need to price a truck in High Point.
Second, the offer. We price against live wholesale, export, and auction comparables rather than a rule of thumb, and you get a firm number in writing inside 24 hours — usually the same business day if you reach us during working hours. The offer is firm. We do not quote high to win the call and then re-negotiate at the dock.
Third, pickup and payment. We schedule transport at our cost, our driver loads it, and you are paid at the time of pickup. For High Point that usually means a pickup window within a few business days, since we already run this corridor.

How we price a High Point forklift
Five things move the number, in roughly this order: hour meter, mast and carriage condition, powertrain health, tires, and attachments. On electrics, battery age and capacity replace powertrain — a truck needing a new lead-acid pack can be several thousand dollars behind an identical unit with a healthy, recently load-tested battery.
We grade A through D and we say the grade out loud. Grade A is starts cold, lifts and tilts to full height under load, no active hydraulic leaks, tires and mast in good order, hour meter working and consistent with the machine's appearance. Grade D still gets an offer, because core, component, and scrap value is not the same as worthless.
Nobody can quote a forklift accurately from a city name alone, and any site that gives you a firm price before seeing the machine is guessing. What we will commit to is the range in the table on this page, a real number within 24 hours of seeing your specs, and no reduction of that number at pickup. Call (954) 740-1983 and we will walk through your truck.
Pickup and transport in High Point
We cover High Point and roughly 80 miles around it, including Greensboro, Winston-Salem, Burlington, Kannapolis. Freight is on us. You do not rent a lift to load a lift, and you do not chase a driver who never shows.
Access is the only thing we need to know in advance. Tell us whether the truck rolls or has to be dragged, whether it is on a dock or on a slab, whether the ceiling clears a mast, and whether there is room for a 48-foot trailer. Non-running units are routine — we bring winches for exactly that.
If the machine is genuinely dead, removal and payment happen in the same visit. You end up with a clear floor and money, instead of a disposal invoice.
What it is worth
Forklift values by capacity in High Point
Wide, honest bands rather than false precision. Hours, mast, tires, battery health, and whether the truck runs decide where a specific machine lands inside its band.
| Capacity | Typical Configuration | Common Use | Cash Range |
|---|---|---|---|
| 3,000 lb | Electric three-wheel, walkie stacker, compact cushion | Retail backrooms, light assembly, small stockrooms | $1,500 – $12,000 |
| 4,000 lb | Electric counterbalance, reach truck, cushion tire | General warehousing, racked storage, light manufacturing | $2,000 – $16,000 |
| 5,000 lb | LP cushion, IC pneumatic, sit-down rider | The default workhorse across nearly every industry | $2,500 – $20,000 |
| 6,000 lb | IC pneumatic, LP cushion, diesel counterbalance | Distribution, lumber, building supply, dock work | $3,000 – $24,000 |
| 8,000 lb | Diesel or LP pneumatic, heavier cushion trucks | Steel, concrete products, heavy distribution, ports | $4,000 – $30,000 |
| 10,000 lb | Diesel pneumatic, dual-tire IC counterbalance | Manufacturing, lumber yards, marine, pipe handling | $5,000 – $38,000 |
| 15,000 lb | Heavy diesel counterbalance, mill-duty trucks | Steel service centres, paper, heavy fabrication | $8,000 – $52,000 |
| 20,000 lb | High-capacity diesel, Taylor / Hoist / Kalmar class | Steel, marine, precast concrete, heavy industry | $12,000 – $75,000 |
| 30,000 lb | Heavy mill-duty forklift, loaded container capable | Ports, steel mills, heavy manufacturing, rail yards | $20,000 – $110,000 |
| 50,000 lb and up | Container handler, reach stacker, super-heavy forklift | Intermodal terminals, ports, steel mills, shipyards | $35,000 – $300,000 |
Condition grading
How we grade a forklift, A through D
Grade it honestly and the offer holds at pickup. We would rather quote a Grade C truck correctly than quote a Grade A number we have to walk back on your dock.
| Grade | Meaning | What It Looks Like | Effect On Offer |
|---|---|---|---|
| A | Ready to Work | Starts cold, lifts and tilts to full height under load, no active hydraulic leaks, tires and mast in good order, hour meter working and consistent with the machine's appearance. | Top of our range |
| B | Running, Needs Minor Work | Runs and lifts but has identifiable minor issues — a seeping cylinder, worn tires, tired battery, cosmetic damage, a non-functioning gauge, or deferred maintenance. | Moderate reduction from top |
| C | Runs Poorly or Lifts Poorly | Starts but runs rough, will not lift to full height, has a significant hydraulic or transmission fault, a failed battery pack, or unknown recent service history. | Substantial reduction |
| D | Non-Running, Scrap, or Incomplete | Will not start, seized engine or drive unit, major structural damage, stripped of components, sat outdoors for years, or already partially dismantled. | Core, component, and scrap value |
How it works
Selling a forklift in High Point, step by step
Send the specs
Make, model, year, hours, fuel type, capacity, and mast. Photos of the four corners, the mast, and the data plate. Call it in or use the form.
Get a cash offer in 24 hours
We price against live wholesale and auction data, not a guess. You get a real number, in writing, usually the same day.
We pick it up and pay
We schedule the rigging and transport at our cost and you are paid at the time of pickup. No fees taken out of the number.
Why sell to us
Why High Point sellers deal with us directly
Why Sell To Us
Four reasons sellers stop shopping and just call
No listing, no waiting
You are not posting an ad and hoping. You are selling directly to the buyer who writes the check.
No commissions, no fees
Brokers take a cut of your sale price. We are not brokers. The number we quote is the number you receive.
Cash offer within 24 hours
Send the specs and photos today and you will have a real number back inside one business day, usually much sooner.
We handle the pickup
Rigging, loading, and transport are ours to arrange and ours to pay for. You do not rent a forklift to load a forklift.
Questions
High Point, NC forklift questions, answered
- How fast can I get a cash offer on a forklift in High Point?
- Within 24 hours of receiving your specs and photos, and often the same business day if you call during working hours (Monday – Saturday, 7:00 AM – 7:00 PM ET). Pickup in High Point is normally scheduled within a few business days after you accept.
- How do I get paid for a forklift in High Point?
- At pickup, when the truck is loaded — not net-30 and not on a check that clears next month. The amount is exactly what we quoted, with nothing withheld for freight, rigging, or fees.
- How much is my forklift worth in High Point?
- Most units in this market fall between $20,000 and $110,000 for a 30,000 lb class truck, with hours, mast condition, powertrain, and battery health deciding where yours lands. We will give you a firm number for your specific machine inside 24 hours.
- Do you buy forklifts in High Point that do not run?
- Yes. Non-running, seized, flood-damaged, and stripped units are a routine purchase. The mast, counterweight, transmission, hydraulics, and steel all hold value, so a dead forklift in High Point is still worth a real number rather than a disposal fee.
- What does it cost to have a forklift picked up in High Point?
- Nothing. We arrange and pay for rigging, loading, and transport out of High Point ourselves. It is not deducted from your offer, and there are no commissions or listing fees at any point.
- What areas around High Point do you cover?
- High Point plus the surrounding South corridor, including Greensboro, Winston-Salem, Burlington, Kannapolis. If your location is not listed, call (954) 740-1983 — we route nationwide and almost certainly cover you.
- Is there any obligation once I get an offer in High Point?
- None. The offer is yours to take or leave, there is no fee for the quote, and we will not badger you afterward. If our number is not the best one you find in High Point, take the better one.
- Who buys used forklifts in High Point?
- We do, directly. Forklifts Buyers is a cash buyer rather than a broker or a listing site, so the company that quotes your truck in High Point is the same company that pays for it and hauls it away. Call (954) 740-1983 with the make, model, and hours.
Ready for a number on your High Point forklift?
Call (954) 740-1983 or send photos and specs. Either way you get a firm cash offer within 24 hours and we handle the pickup.
Nearby cities we buy forklifts in
- Forklift Removal in Greensboro, NC
- Forklift Removal in Winston-Salem, NC
- Forklift Removal in Burlington, NC
- Forklift Removal in Kannapolis, NC
- Forklift Removal in Concord, NC
- Forklift Removal in Chapel Hill, NC
- Forklift Removal in Huntersville, NC
- Forklift Removal in Durham, NC
- Forklift Removal in Apex, NC
- Forklift Removal in Charlotte, NC
- Forklift Removal in Cary, NC
- Forklift Removal in Hickory, NC