Winston-Salem, NC
Who Buys Used Forklifts Serving Winston-Salem and North Carolina
The honest answer to that question is: dealers, wholesalers, exporters, and direct cash buyers like us. Between the warehousing and distribution in and around Winston-Salem and the fact that this is an established industrial and commercial center, there is no shortage of lift trucks reaching the end of their service life here. We buy them outright. No consignment, no commission, no waiting for someone else's financing to clear.
Monday – Saturday, 7:00 AM – 7:00 PM ET · No fees, no commissions, free pickup.

The forklifts we take in Winston-Salem
Our scope is forklifts and the material handling equipment that lives beside them — nothing else. In Winston-Salem that means lp / propane, cushion tire, multi-directional, electric counterbalance, telehandler, container handler, plus electric pallet jacks, walkie stackers, order pickers, and telehandlers. If it lifts pallets, we are interested.
We buy every major nameplate: Bobcat, Skyjack, Hyster, Nissan / UniCarriers, JLG, Landoll, Combilift, Kalmar, and the rest. Brand matters to the offer, but far less than hours, mast condition, and whether the truck runs. A high-hour Toyota with a tired mast can be worth less than a low-hour Doosan that has been maintained.
Capacity range runs from 2,000 lb walkies up through 40,000 lb+ container handlers. The classes we see most often in Winston-Salem are 30,000 lb, 6,000 lb, 20,000 lb, 3,000 lb. Searches like "who buys old forklifts" and "who buys broken forklifts" all land in the same place: send the specs, get a number.
Have the make, model, and hours handy? One call is usually all it takes.
(954) 740-1983How selling a forklift in Winston-Salem actually works
First, the specs. Make, model, year, hour meter, fuel type, capacity, and mast configuration. Then photos: all four corners, the mast fully lowered, the data plate, and the hour meter. That is genuinely all we need to price a truck in Winston-Salem.
Second, the offer. We price against live wholesale, export, and auction comparables rather than a rule of thumb, and you get a firm number in writing inside 24 hours — usually the same business day if you reach us during working hours. If we are not the strongest buyer for your particular truck, we will tell you that instead of wasting your week.
Third, pickup and payment. We schedule transport at our cost, our driver loads it, and you are paid at the time of pickup. For Winston-Salem that usually means a pickup window within a few business days, since we already run this corridor.

Where the number comes from
Five things move the number, in roughly this order: hour meter, mast and carriage condition, powertrain health, tires, and attachments. On electrics, battery age and capacity replace powertrain — a truck needing a new lead-acid pack can be several thousand dollars behind an identical unit with a healthy, recently load-tested battery.
We grade A through D and we say the grade out loud. Grade A is starts cold, lifts and tilts to full height under load, no active hydraulic leaks, tires and mast in good order, hour meter working and consistent with the machine's appearance. Grade D still gets an offer, because core, component, and scrap value is not the same as worthless.
Nobody can quote a forklift accurately from a city name alone, and any site that gives you a firm price before seeing the machine is guessing. What we will commit to is the range in the table on this page, a real number within 24 hours of seeing your specs, and no reduction of that number at pickup. Call (954) 740-1983 and we will walk through your truck.
How removal works in Winston-Salem
We cover Winston-Salem and roughly 52 miles around it, including High Point, Greensboro, Burlington, Kannapolis. Freight is on us. You do not rent a lift to load a lift, and you do not chase a driver who never shows.
Access is the only thing we need to know in advance. Tell us whether the truck rolls or has to be dragged, whether it is on a dock or on a slab, whether the ceiling clears a mast, and whether there is room for a 48-foot trailer. Non-running units are routine — we bring winches for exactly that.
Single units and small lots get scheduled around your operation, including after-hours and weekend loading when a plant cannot give up the dock during production.
What it is worth
Forklift values by capacity in Winston-Salem
Wide, honest bands rather than false precision. Hours, mast, tires, battery health, and whether the truck runs decide where a specific machine lands inside its band.
| Capacity | Typical Configuration | Common Use | Cash Range |
|---|---|---|---|
| 3,000 lb | Electric three-wheel, walkie stacker, compact cushion | Retail backrooms, light assembly, small stockrooms | $1,500 – $12,000 |
| 4,000 lb | Electric counterbalance, reach truck, cushion tire | General warehousing, racked storage, light manufacturing | $2,000 – $16,000 |
| 5,000 lb | LP cushion, IC pneumatic, sit-down rider | The default workhorse across nearly every industry | $2,500 – $20,000 |
| 6,000 lb | IC pneumatic, LP cushion, diesel counterbalance | Distribution, lumber, building supply, dock work | $3,000 – $24,000 |
| 8,000 lb | Diesel or LP pneumatic, heavier cushion trucks | Steel, concrete products, heavy distribution, ports | $4,000 – $30,000 |
| 10,000 lb | Diesel pneumatic, dual-tire IC counterbalance | Manufacturing, lumber yards, marine, pipe handling | $5,000 – $38,000 |
| 15,000 lb | Heavy diesel counterbalance, mill-duty trucks | Steel service centres, paper, heavy fabrication | $8,000 – $52,000 |
| 20,000 lb | High-capacity diesel, Taylor / Hoist / Kalmar class | Steel, marine, precast concrete, heavy industry | $12,000 – $75,000 |
| 30,000 lb | Heavy mill-duty forklift, loaded container capable | Ports, steel mills, heavy manufacturing, rail yards | $20,000 – $110,000 |
| 50,000 lb and up | Container handler, reach stacker, super-heavy forklift | Intermodal terminals, ports, steel mills, shipyards | $35,000 – $300,000 |
Condition grading
How we grade a forklift, A through D
Grade it honestly and the offer holds at pickup. We would rather quote a Grade C truck correctly than quote a Grade A number we have to walk back on your dock.
| Grade | Meaning | What It Looks Like | Effect On Offer |
|---|---|---|---|
| A | Ready to Work | Starts cold, lifts and tilts to full height under load, no active hydraulic leaks, tires and mast in good order, hour meter working and consistent with the machine's appearance. | Top of our range |
| B | Running, Needs Minor Work | Runs and lifts but has identifiable minor issues — a seeping cylinder, worn tires, tired battery, cosmetic damage, a non-functioning gauge, or deferred maintenance. | Moderate reduction from top |
| C | Runs Poorly or Lifts Poorly | Starts but runs rough, will not lift to full height, has a significant hydraulic or transmission fault, a failed battery pack, or unknown recent service history. | Substantial reduction |
| D | Non-Running, Scrap, or Incomplete | Will not start, seized engine or drive unit, major structural damage, stripped of components, sat outdoors for years, or already partially dismantled. | Core, component, and scrap value |
How it works
Selling a forklift in Winston-Salem, step by step
Send the specs
Make, model, year, hours, fuel type, capacity, and mast. Photos of the four corners, the mast, and the data plate. Call it in or use the form.
Get a cash offer in 24 hours
We price against live wholesale and auction data, not a guess. You get a real number, in writing, usually the same day.
We pick it up and pay
We schedule the rigging and transport at our cost and you are paid at the time of pickup. No fees taken out of the number.
Why sell to us
Why Winston-Salem sellers deal with us directly
Why Sell To Us
Four reasons sellers stop shopping and just call
No listing, no waiting
You are not posting an ad and hoping. You are selling directly to the buyer who writes the check.
No commissions, no fees
Brokers take a cut of your sale price. We are not brokers. The number we quote is the number you receive.
Cash offer within 24 hours
Send the specs and photos today and you will have a real number back inside one business day, usually much sooner.
We handle the pickup
Rigging, loading, and transport are ours to arrange and ours to pay for. You do not rent a forklift to load a forklift.
Questions
Winston-Salem, NC forklift questions, answered
- What information do you need to quote a forklift in Winston-Salem?
- Make, model, year, hour meter reading, fuel type, lift capacity, mast type, and honest condition notes, plus photos of the four corners, the lowered mast, the data plate, and the hour meter. That is enough to price it accurately without a site visit.
- What does it cost to have a forklift picked up in Winston-Salem?
- Nothing. We arrange and pay for rigging, loading, and transport out of Winston-Salem ourselves. It is not deducted from your offer, and there are no commissions or listing fees at any point.
- Do you buy more than one forklift at a time in Winston-Salem?
- Fleet lots are where we are most competitive, because one trip to Winston-Salem covers every unit. Whether it is three trucks or forty, you get a single offer, a single pickup, and a single payment. Plant closures and consolidations are a large part of what we do.
- Can you buy a side loader forklift in Winston-Salem?
- Yes. Side loaders carry long material sideways down narrow aisles, which makes them essential in steel service centres and lumber operations. We buy them in Winston-Salem at every grade, from turn-key to non-running, in the 6,000 – 20,000 lb range.
- Do you buy forklifts in Winston-Salem that do not run?
- Yes. Non-running, seized, flood-damaged, and stripped units are a routine purchase. The mast, counterweight, transmission, hydraulics, and steel all hold value, so a dead forklift in Winston-Salem is still worth a real number rather than a disposal fee.
- Do you buy Hoist forklifts in Winston-Salem?
- Yes — Hoist and every other major nameplate, including Toyota, Hyster, Yale, Crown, Raymond, Clark, Komatsu, CAT, Mitsubishi, and Doosan. Hoist builds heavy-capacity and mill-duty trucks including electric high-capacity models. Specialised machines with real value.
- Do you buy pallet jacks and other material handling equipment in Winston-Salem?
- Yes, within our lane: electric pallet jacks, walkie stackers, reach trucks, order pickers, telehandlers, and forklift attachments. We are forklift specialists and we do not buy outside material handling.
- How much is my forklift worth in Winston-Salem?
- Most units in this market fall between $1,500 and $12,000 for a 3,000 lb class truck, with hours, mast condition, powertrain, and battery health deciding where yours lands. We will give you a firm number for your specific machine inside 24 hours.
Ready for a number on your Winston-Salem forklift?
Call (954) 740-1983 or send photos and specs. Either way you get a firm cash offer within 24 hours and we handle the pickup.
Nearby cities we buy forklifts in
- Who Buys Used Forklifts in High Point, NC
- Who Buys Used Forklifts in Greensboro, NC
- Who Buys Used Forklifts in Burlington, NC
- Who Buys Used Forklifts in Kannapolis, NC
- Who Buys Used Forklifts in Concord, NC
- Who Buys Used Forklifts in Huntersville, NC
- Who Buys Used Forklifts in Hickory, NC
- Who Buys Used Forklifts in Chapel Hill, NC
- Who Buys Used Forklifts in Charlotte, NC
- Who Buys Used Forklifts in Durham, NC
- Who Buys Used Forklifts in Gastonia, NC
- Who Buys Used Forklifts in Apex, NC
Other ways we help Winston-Salem sellers
- Forklift Buyers — Winston-Salem
- Used Forklift Buyers — Winston-Salem
- Sell My Forklift — Winston-Salem
- We Buy Forklifts — Winston-Salem
- Cash For Forklifts — Winston-Salem
- Scrap Forklift Buyers — Winston-Salem
- Forklift Removal — Winston-Salem
- Surplus Forklift Buyers — Winston-Salem
- Forklift Fleet Liquidation — Winston-Salem