Greenville, MS

Who Buys Used Forklifts in Greenville, MS

The honest answer to that question is: dealers, wholesalers, exporters, and direct cash buyers like us. Between the manufacturing and fabrication in and around Greenville and the fact that this is a smaller market we cover on the same routes as the nearby metros, there is no shortage of lift trucks reaching the end of their service life here. We buy them outright. No consignment, no commission, no waiting for someone else's financing to clear.

Monday – Saturday, 7:00 AM – 7:00 PM ET · No fees, no commissions, free pickup.

Green telehandler forklift with loose forks and attachments laid out on the ground before removal

Every type of lift truck, Greenville included

Our scope is forklifts and the material handling equipment that lives beside them — nothing else. In Greenville and Washington County that means multi-directional, narrow aisle, attachments, gasoline, telehandler, stand-up rider, plus electric pallet jacks, walkie stackers, order pickers, and telehandlers. If it lifts pallets, we are interested.

We buy every major nameplate: JLG, Daewoo, Skyjack, Mitsubishi, Other & Unlisted Brands, Genie, Big Joe, Nissan / UniCarriers, and the rest. Brand matters to the offer, but far less than hours, mast condition, and whether the truck runs. A high-hour Toyota with a tired mast can be worth less than a low-hour Doosan that has been maintained.

Capacity range runs from 2,000 lb walkies up through 40,000 lb+ container handlers. The classes we see most often in Greenville are 10,000 lb, 50,000 lb and up, 5,000 lb, 6,000 lb. Searches like "where can I sell my used forklift" and "who buys used forklifts near me" all land in the same place: send the specs, get a number.

Have the make, model, and hours handy? One call is usually all it takes.

(954) 740-1983

What happens after you call us from Greenville

First, the specs. Make, model, year, hour meter, fuel type, capacity, and mast configuration. Then photos: all four corners, the mast fully lowered, the data plate, and the hour meter. That is genuinely all we need to price a truck in Greenville.

Second, the offer. We price against live wholesale, export, and auction comparables rather than a rule of thumb, and you get a firm number in writing inside 24 hours — usually the same business day if you reach us during working hours. If we are not the strongest buyer for your particular truck, we will tell you that instead of wasting your week.

Third, pickup and payment. We schedule transport at our cost, our driver loads it, and you are paid at the time of pickup. For Greenville that usually means a pickup window within a few business days, since we already run this corridor.

Rough terrain forklifts lined up in a yard alongside other lift trucks awaiting pickup
Rough terrain lift trucks in our yard

What your forklift is worth in Greenville

Five things move the number, in roughly this order: hour meter, mast and carriage condition, powertrain health, tires, and attachments. On electrics, battery age and capacity replace powertrain — a truck needing a new lead-acid pack can be several thousand dollars behind an identical unit with a healthy, recently load-tested battery.

We grade A through D and we say the grade out loud. Grade A is starts cold, lifts and tilts to full height under load, no active hydraulic leaks, tires and mast in good order, hour meter working and consistent with the machine's appearance. Grade D still gets an offer, because core, component, and scrap value is not the same as worthless.

Nobody can quote a forklift accurately from a city name alone, and any site that gives you a firm price before seeing the machine is guessing. What we will commit to is the range in the table on this page, a real number within 24 hours of seeing your specs, and no reduction of that number at pickup. Call (954) 740-1983 and we will walk through your truck.

Getting it out of your building in Greenville

We cover Greenville and roughly 79 miles around it, including Vicksburg, Jackson, Southaven, Olive Branch. Freight is on us. You do not rent a lift to load a lift, and you do not chase a driver who never shows.

Access is the only thing we need to know in advance. Tell us whether the truck rolls or has to be dragged, whether it is on a dock or on a slab, whether the ceiling clears a mast, and whether there is room for a 48-foot trailer. Non-running units are routine — we bring winches for exactly that.

Single units and small lots get scheduled around your operation, including after-hours and weekend loading when a plant cannot give up the dock during production.

What it is worth

Forklift values by capacity in Greenville

Wide, honest bands rather than false precision. Hours, mast, tires, battery health, and whether the truck runs decide where a specific machine lands inside its band.

Ranges reflect what we actually pay across grades A through D. Condition, hours, brand, and attachments decide where a specific truck lands. Call (954) 740-1983 for a real number on your machine.
CapacityTypical ConfigurationCash Range
3,000 lbElectric three-wheel, walkie stacker, compact cushion$1,500$12,000
4,000 lbElectric counterbalance, reach truck, cushion tire$2,000$16,000
5,000 lbLP cushion, IC pneumatic, sit-down rider$2,500$20,000
6,000 lbIC pneumatic, LP cushion, diesel counterbalance$3,000$24,000
8,000 lbDiesel or LP pneumatic, heavier cushion trucks$4,000$30,000
10,000 lbDiesel pneumatic, dual-tire IC counterbalance$5,000$38,000
15,000 lbHeavy diesel counterbalance, mill-duty trucks$8,000$52,000
20,000 lbHigh-capacity diesel, Taylor / Hoist / Kalmar class$12,000$75,000
30,000 lbHeavy mill-duty forklift, loaded container capable$20,000$110,000
50,000 lb and upContainer handler, reach stacker, super-heavy forklift$35,000$300,000

Condition grading

How we grade a forklift, A through D

Grade it honestly and the offer holds at pickup. We would rather quote a Grade C truck correctly than quote a Grade A number we have to walk back on your dock.

We grade honestly on the phone and we do not re-negotiate at the dock. Tell us the truth about the machine and the offer stands.
GradeMeaningWhat It Looks LikeEffect On Offer
AReady to WorkStarts cold, lifts and tilts to full height under load, no active hydraulic leaks, tires and mast in good order, hour meter working and consistent with the machine's appearance.Top of our range
BRunning, Needs Minor WorkRuns and lifts but has identifiable minor issues — a seeping cylinder, worn tires, tired battery, cosmetic damage, a non-functioning gauge, or deferred maintenance.Moderate reduction from top
CRuns Poorly or Lifts PoorlyStarts but runs rough, will not lift to full height, has a significant hydraulic or transmission fault, a failed battery pack, or unknown recent service history.Substantial reduction
DNon-Running, Scrap, or IncompleteWill not start, seized engine or drive unit, major structural damage, stripped of components, sat outdoors for years, or already partially dismantled.Core, component, and scrap value

How it works

Selling a forklift in Greenville, step by step

1

Send the specs

Make, model, year, hours, fuel type, capacity, and mast. Photos of the four corners, the mast, and the data plate. Call it in or use the form.

2

Get a cash offer in 24 hours

We price against live wholesale and auction data, not a guess. You get a real number, in writing, usually the same day.

3

We pick it up and pay

We schedule the rigging and transport at our cost and you are paid at the time of pickup. No fees taken out of the number.

Why sell to us

Why Greenville sellers deal with us directly

Why Sell To Us

Four reasons sellers stop shopping and just call

01

No listing, no waiting

You are not posting an ad and hoping. You are selling directly to the buyer who writes the check.

02

No commissions, no fees

Brokers take a cut of your sale price. We are not brokers. The number we quote is the number you receive.

03

Cash offer within 24 hours

Send the specs and photos today and you will have a real number back inside one business day, usually much sooner.

04

We handle the pickup

Rigging, loading, and transport are ours to arrange and ours to pay for. You do not rent a forklift to load a forklift.

Questions

Greenville, MS forklift questions, answered

Do you buy pallet jacks and other material handling equipment in Greenville?
Yes, within our lane: electric pallet jacks, walkie stackers, reach trucks, order pickers, telehandlers, and forklift attachments. We are forklift specialists and we do not buy outside material handling.
Do you buy more than one forklift at a time in Greenville?
Fleet lots are where we are most competitive, because one trip to Greenville covers every unit. Whether it is three trucks or forty, you get a single offer, a single pickup, and a single payment. Plant closures and consolidations are a large part of what we do.
What does it cost to have a forklift picked up in Greenville?
Nothing. We arrange and pay for rigging, loading, and transport out of Greenville ourselves. It is not deducted from your offer, and there are no commissions or listing fees at any point.
Who buys used forklifts in Greenville?
We do, directly. Forklifts Buyers is a cash buyer rather than a broker or a listing site, so the company that quotes your truck in Greenville is the same company that pays for it and hauls it away. Call (954) 740-1983 with the make, model, and hours.
How do I get paid for a forklift in Greenville?
At pickup, when the truck is loaded — not net-30 and not on a check that clears next month. The amount is exactly what we quoted, with nothing withheld for freight, rigging, or fees.
Is there any obligation once I get an offer in Greenville?
None. The offer is yours to take or leave, there is no fee for the quote, and we will not badger you afterward. If our number is not the best one you find in Greenville, take the better one.
Do you buy SkyTrak forklifts in Greenville?
Yes — SkyTrak and every other major nameplate, including Toyota, Hyster, Yale, Crown, Raymond, Clark, Komatsu, CAT, Mitsubishi, and Doosan. SkyTrak is the workhorse compact telehandler on residential and commercial sites. Now under JLG, with good parts support and steady demand.
What areas around Greenville do you cover?
Greenville plus the surrounding South corridor, including Vicksburg, Jackson, Southaven, Olive Branch. If your location is not listed, call (954) 740-1983 — we route nationwide and almost certainly cover you.

Ready for a number on your Greenville forklift?

Call (954) 740-1983 or send photos and specs. Either way you get a firm cash offer within 24 hours and we handle the pickup.