Riverton, UT

Used Forklift Buyers in Riverton, UT

We are the buyer, not the middleman. That distinction is the whole reason this page exists. We work Riverton, UT regularly and combine it with stops in South Jordan and Draper, which is why we can be competitive on a single unit instead of only on fleets. Tell us the make, model, year, hours, fuel type, capacity, and mast, send a few photos, and you will have a firm number the same day in most cases. The warehousing and distribution here produces exactly the kind of trucks our buyers want.

Monday – Saturday, 7:00 AM – 7:00 PM ET · No fees, no commissions, free pickup.

Used Yale electric forklift with mast raised, an example of an older lift truck we still pay cash for

Every type of lift truck, Riverton included

Our scope is forklifts and the material handling equipment that lives beside them — nothing else. In Riverton and Salt Lake County that means ic pneumatic, cushion tire, pallet jack, sit-down rider, multi-directional, order picker, plus electric pallet jacks, walkie stackers, order pickers, and telehandlers. If it lifts pallets, we are interested.

We buy every major nameplate: Yale, Nissan / UniCarriers, Hoist, Taylor, Big Joe, Hyster, Caterpillar, Komatsu, and the rest. Brand matters to the offer, but far less than hours, mast condition, and whether the truck runs. A high-hour Toyota with a tired mast can be worth less than a low-hour Doosan that has been maintained.

Capacity range runs from 2,000 lb walkies up through 40,000 lb+ container handlers. The classes we see most often in Riverton are 50,000 lb and up, 10,000 lb, 8,000 lb, 6,000 lb. Searches like "used forklift buyers near me" and "who buys used forklifts" all land in the same place: send the specs, get a number.

Have the make, model, and hours handy? One call is usually all it takes.

(954) 740-1983

What happens after you call us from Riverton

First, the specs. Make, model, year, hour meter, fuel type, capacity, and mast configuration. Then photos: all four corners, the mast fully lowered, the data plate, and the hour meter. That is genuinely all we need to price a truck in Riverton.

Second, the offer. We price against live wholesale, export, and auction comparables rather than a rule of thumb, and you get a firm number in writing inside 24 hours — usually the same business day if you reach us during working hours. The offer is firm. We do not quote high to win the call and then re-negotiate at the dock.

Third, pickup and payment. We schedule transport at our cost, our driver loads it, and you are paid at the time of pickup. For Riverton that usually means a pickup window within a few business days, since we already run this corridor.

Telehandler telescopic boom forklift with boom extended at an industrial site
Telehandler with boom extended — telescopic forklifts welcome

What your forklift is worth in Riverton

Five things move the number, in roughly this order: hour meter, mast and carriage condition, powertrain health, tires, and attachments. On electrics, battery age and capacity replace powertrain — a truck needing a new lead-acid pack can be several thousand dollars behind an identical unit with a healthy, recently load-tested battery.

We grade A through D and we say the grade out loud. Grade A is starts cold, lifts and tilts to full height under load, no active hydraulic leaks, tires and mast in good order, hour meter working and consistent with the machine's appearance. Grade D still gets an offer, because core, component, and scrap value is not the same as worthless.

Nobody can quote a forklift accurately from a city name alone, and any site that gives you a firm price before seeing the machine is guessing. What we will commit to is the range in the table on this page, a real number within 24 hours of seeing your specs, and no reduction of that number at pickup. Call (954) 740-1983 and we will walk through your truck.

Getting it out of your building in Riverton

We cover Riverton and roughly 87 miles around it, including South Jordan, Draper, West Jordan, Sandy. Freight is on us. You do not rent a lift to load a lift, and you do not chase a driver who never shows.

Access is the only thing we need to know in advance. Tell us whether the truck rolls or has to be dragged, whether it is on a dock or on a slab, whether the ceiling clears a mast, and whether there is room for a 48-foot trailer. Non-running units are routine — we bring winches for exactly that.

Single units and small lots get scheduled around your operation, including after-hours and weekend loading when a plant cannot give up the dock during production.

What it is worth

Forklift values by capacity in Riverton

Wide, honest bands rather than false precision. Hours, mast, tires, battery health, and whether the truck runs decide where a specific machine lands inside its band.

Ranges reflect what we actually pay across grades A through D. Condition, hours, brand, and attachments decide where a specific truck lands. Call (954) 740-1983 for a real number on your machine.
CapacityTypical ConfigurationCash Range
3,000 lbElectric three-wheel, walkie stacker, compact cushion$1,500$12,000
4,000 lbElectric counterbalance, reach truck, cushion tire$2,000$16,000
5,000 lbLP cushion, IC pneumatic, sit-down rider$2,500$20,000
6,000 lbIC pneumatic, LP cushion, diesel counterbalance$3,000$24,000
8,000 lbDiesel or LP pneumatic, heavier cushion trucks$4,000$30,000
10,000 lbDiesel pneumatic, dual-tire IC counterbalance$5,000$38,000
15,000 lbHeavy diesel counterbalance, mill-duty trucks$8,000$52,000
20,000 lbHigh-capacity diesel, Taylor / Hoist / Kalmar class$12,000$75,000
30,000 lbHeavy mill-duty forklift, loaded container capable$20,000$110,000
50,000 lb and upContainer handler, reach stacker, super-heavy forklift$35,000$300,000

Condition grading

How we grade a forklift, A through D

Grade it honestly and the offer holds at pickup. We would rather quote a Grade C truck correctly than quote a Grade A number we have to walk back on your dock.

We grade honestly on the phone and we do not re-negotiate at the dock. Tell us the truth about the machine and the offer stands.
GradeMeaningWhat It Looks LikeEffect On Offer
AReady to WorkStarts cold, lifts and tilts to full height under load, no active hydraulic leaks, tires and mast in good order, hour meter working and consistent with the machine's appearance.Top of our range
BRunning, Needs Minor WorkRuns and lifts but has identifiable minor issues — a seeping cylinder, worn tires, tired battery, cosmetic damage, a non-functioning gauge, or deferred maintenance.Moderate reduction from top
CRuns Poorly or Lifts PoorlyStarts but runs rough, will not lift to full height, has a significant hydraulic or transmission fault, a failed battery pack, or unknown recent service history.Substantial reduction
DNon-Running, Scrap, or IncompleteWill not start, seized engine or drive unit, major structural damage, stripped of components, sat outdoors for years, or already partially dismantled.Core, component, and scrap value

How it works

Selling a forklift in Riverton, step by step

1

Send the specs

Make, model, year, hours, fuel type, capacity, and mast. Photos of the four corners, the mast, and the data plate. Call it in or use the form.

2

Get a cash offer in 24 hours

We price against live wholesale and auction data, not a guess. You get a real number, in writing, usually the same day.

3

We pick it up and pay

We schedule the rigging and transport at our cost and you are paid at the time of pickup. No fees taken out of the number.

Why sell to us

Why Riverton sellers deal with us directly

Why Sell To Us

Four reasons sellers stop shopping and just call

01

No listing, no waiting

You are not posting an ad and hoping. You are selling directly to the buyer who writes the check.

02

No commissions, no fees

Brokers take a cut of your sale price. We are not brokers. The number we quote is the number you receive.

03

Cash offer within 24 hours

Send the specs and photos today and you will have a real number back inside one business day, usually much sooner.

04

We handle the pickup

Rigging, loading, and transport are ours to arrange and ours to pay for. You do not rent a forklift to load a forklift.

Questions

Riverton, UT forklift questions, answered

Can you buy a narrow aisle forklift in Riverton?
Yes. Purpose-built to work aisles too tight for a counterbalance truck. We buy them in Riverton at every grade, from turn-key to non-running, in the 3,000 – 5,000 lb range.
Do you buy Raymond forklifts in Riverton?
Yes — Raymond and every other major nameplate, including Toyota, Hyster, Yale, Crown, Raymond, Clark, Komatsu, CAT, Mitsubishi, and Doosan. Raymond reach trucks and orderpickers are the benchmark in racked distribution centres. Matched Raymond fleets are among the most valuable lots we buy.
Do you buy forklifts in Riverton that do not run?
Yes. Non-running, seized, flood-damaged, and stripped units are a routine purchase. The mast, counterweight, transmission, hydraulics, and steel all hold value, so a dead forklift in Riverton is still worth a real number rather than a disposal fee.
What information do you need to quote a forklift in Riverton?
Make, model, year, hour meter reading, fuel type, lift capacity, mast type, and honest condition notes, plus photos of the four corners, the lowered mast, the data plate, and the hour meter. That is enough to price it accurately without a site visit.
My forklift is on the second floor in Riverton. Can you still get it out?
Usually, yes — freight elevators, ramps, and rigging are all part of the job. Tell us the access details up front (floor, doorway width, ceiling height, whether it rolls) so the right equipment shows up the first time.
How do I get paid for a forklift in Riverton?
At pickup, when the truck is loaded — not net-30 and not on a check that clears next month. The amount is exactly what we quoted, with nothing withheld for freight, rigging, or fees.
What areas around Riverton do you cover?
Riverton plus the surrounding West corridor, including South Jordan, Draper, West Jordan, Sandy. If your location is not listed, call (954) 740-1983 — we route nationwide and almost certainly cover you.
How fast can I get a cash offer on a forklift in Riverton?
Within 24 hours of receiving your specs and photos, and often the same business day if you call during working hours (Monday – Saturday, 7:00 AM – 7:00 PM ET). Pickup in Riverton is normally scheduled within a few business days after you accept.

Ready for a number on your Riverton forklift?

Call (954) 740-1983 or send photos and specs. Either way you get a firm cash offer within 24 hours and we handle the pickup.