Edmond, OK
Surplus Forklift Buyers in Edmond, OK
Surplus lift trucks sitting against the back wall are worth more today than they will be next quarter. If you are searching for surplus forklift buyers in Edmond, you have a lift truck to move and a limited appetite for hassle. We cover Edmond on the same runs as Oklahoma City and Midwest City, so pickup here is routine rather than a special trip. Local agriculture and food processing keeps a steady supply of used forklifts moving, and we buy them at every grade from turn-key to non-running.
Monday – Saturday, 7:00 AM – 7:00 PM ET · No fees, no commissions, free pickup.

Every type of lift truck, Edmond included
Our scope is forklifts and the material handling equipment that lives beside them — nothing else. In Edmond and Oklahoma County that means diesel, telehandler, high capacity, pallet jack, electric counterbalance, gasoline, plus electric pallet jacks, walkie stackers, order pickers, and telehandlers. If it lifts pallets, we are interested.
We buy every major nameplate: TCM, Doosan, Genie, Combilift, Crown, Toyota, Big Joe, SkyTrak, and the rest. Brand matters to the offer, but far less than hours, mast condition, and whether the truck runs. A high-hour Toyota with a tired mast can be worth less than a low-hour Doosan that has been maintained.
Capacity range runs from 2,000 lb walkies up through 40,000 lb+ container handlers. The classes we see most often in Edmond are 6,000 lb, 30,000 lb, 3,000 lb, 4,000 lb. Searches like "idle forklift buyers" and "excess forklift inventory buyers" all land in the same place: send the specs, get a number.
Have the make, model, and hours handy? One call is usually all it takes.
(954) 740-1983What happens after you call us from Edmond
First, the specs. Make, model, year, hour meter, fuel type, capacity, and mast configuration. Then photos: all four corners, the mast fully lowered, the data plate, and the hour meter. That is genuinely all we need to price a truck in Edmond.
Second, the offer. We price against live wholesale, export, and auction comparables rather than a rule of thumb, and you get a firm number in writing inside 24 hours — usually the same business day if you reach us during working hours. The offer is firm. We do not quote high to win the call and then re-negotiate at the dock.
Third, pickup and payment. We schedule transport at our cost, our driver loads it, and you are paid at the time of pickup. For Edmond that usually means a pickup window within a few business days, since we already run this corridor.

What your forklift is worth in Edmond
Five things move the number, in roughly this order: hour meter, mast and carriage condition, powertrain health, tires, and attachments. On electrics, battery age and capacity replace powertrain — a truck needing a new lead-acid pack can be several thousand dollars behind an identical unit with a healthy, recently load-tested battery.
We grade A through D and we say the grade out loud. Grade A is starts cold, lifts and tilts to full height under load, no active hydraulic leaks, tires and mast in good order, hour meter working and consistent with the machine's appearance. Grade D still gets an offer, because core, component, and scrap value is not the same as worthless.
Nobody can quote a forklift accurately from a city name alone, and any site that gives you a firm price before seeing the machine is guessing. What we will commit to is the range in the table on this page, a real number within 24 hours of seeing your specs, and no reduction of that number at pickup. Call (954) 740-1983 and we will walk through your truck.
Getting it out of your building in Edmond
We cover Edmond and roughly 61 miles around it, including Oklahoma City, Midwest City, Moore, Norman. Freight is on us. You do not rent a lift to load a lift, and you do not chase a driver who never shows.
Access is the only thing we need to know in advance. Tell us whether the truck rolls or has to be dragged, whether it is on a dock or on a slab, whether the ceiling clears a mast, and whether there is room for a 48-foot trailer. Non-running units are routine — we bring winches for exactly that.
Single units and small lots get scheduled around your operation, including after-hours and weekend loading when a plant cannot give up the dock during production.
What it is worth
Forklift values by capacity in Edmond
Wide, honest bands rather than false precision. Hours, mast, tires, battery health, and whether the truck runs decide where a specific machine lands inside its band.
| Capacity | Typical Configuration | Common Use | Cash Range |
|---|---|---|---|
| 3,000 lb | Electric three-wheel, walkie stacker, compact cushion | Retail backrooms, light assembly, small stockrooms | $1,500 – $12,000 |
| 4,000 lb | Electric counterbalance, reach truck, cushion tire | General warehousing, racked storage, light manufacturing | $2,000 – $16,000 |
| 5,000 lb | LP cushion, IC pneumatic, sit-down rider | The default workhorse across nearly every industry | $2,500 – $20,000 |
| 6,000 lb | IC pneumatic, LP cushion, diesel counterbalance | Distribution, lumber, building supply, dock work | $3,000 – $24,000 |
| 8,000 lb | Diesel or LP pneumatic, heavier cushion trucks | Steel, concrete products, heavy distribution, ports | $4,000 – $30,000 |
| 10,000 lb | Diesel pneumatic, dual-tire IC counterbalance | Manufacturing, lumber yards, marine, pipe handling | $5,000 – $38,000 |
| 15,000 lb | Heavy diesel counterbalance, mill-duty trucks | Steel service centres, paper, heavy fabrication | $8,000 – $52,000 |
| 20,000 lb | High-capacity diesel, Taylor / Hoist / Kalmar class | Steel, marine, precast concrete, heavy industry | $12,000 – $75,000 |
| 30,000 lb | Heavy mill-duty forklift, loaded container capable | Ports, steel mills, heavy manufacturing, rail yards | $20,000 – $110,000 |
| 50,000 lb and up | Container handler, reach stacker, super-heavy forklift | Intermodal terminals, ports, steel mills, shipyards | $35,000 – $300,000 |
Condition grading
How we grade a forklift, A through D
Grade it honestly and the offer holds at pickup. We would rather quote a Grade C truck correctly than quote a Grade A number we have to walk back on your dock.
| Grade | Meaning | What It Looks Like | Effect On Offer |
|---|---|---|---|
| A | Ready to Work | Starts cold, lifts and tilts to full height under load, no active hydraulic leaks, tires and mast in good order, hour meter working and consistent with the machine's appearance. | Top of our range |
| B | Running, Needs Minor Work | Runs and lifts but has identifiable minor issues — a seeping cylinder, worn tires, tired battery, cosmetic damage, a non-functioning gauge, or deferred maintenance. | Moderate reduction from top |
| C | Runs Poorly or Lifts Poorly | Starts but runs rough, will not lift to full height, has a significant hydraulic or transmission fault, a failed battery pack, or unknown recent service history. | Substantial reduction |
| D | Non-Running, Scrap, or Incomplete | Will not start, seized engine or drive unit, major structural damage, stripped of components, sat outdoors for years, or already partially dismantled. | Core, component, and scrap value |
How it works
Selling a forklift in Edmond, step by step
Send the specs
Make, model, year, hours, fuel type, capacity, and mast. Photos of the four corners, the mast, and the data plate. Call it in or use the form.
Get a cash offer in 24 hours
We price against live wholesale and auction data, not a guess. You get a real number, in writing, usually the same day.
We pick it up and pay
We schedule the rigging and transport at our cost and you are paid at the time of pickup. No fees taken out of the number.
Why sell to us
Why Edmond sellers deal with us directly
Why Sell To Us
Four reasons sellers stop shopping and just call
No listing, no waiting
You are not posting an ad and hoping. You are selling directly to the buyer who writes the check.
No commissions, no fees
Brokers take a cut of your sale price. We are not brokers. The number we quote is the number you receive.
Cash offer within 24 hours
Send the specs and photos today and you will have a real number back inside one business day, usually much sooner.
We handle the pickup
Rigging, loading, and transport are ours to arrange and ours to pay for. You do not rent a forklift to load a forklift.
Questions
Edmond, OK forklift questions, answered
- What areas around Edmond do you cover?
- Edmond plus the surrounding South corridor, including Oklahoma City, Midwest City, Moore, Norman. If your location is not listed, call (954) 740-1983 — we route nationwide and almost certainly cover you.
- Who buys used forklifts in Edmond?
- We do, directly. Forklifts Buyers is a cash buyer rather than a broker or a listing site, so the company that quotes your truck in Edmond is the same company that pays for it and hauls it away. Call (954) 740-1983 with the make, model, and hours.
- How do I get paid for a forklift in Edmond?
- At pickup, when the truck is loaded — not net-30 and not on a check that clears next month. The amount is exactly what we quoted, with nothing withheld for freight, rigging, or fees.
- What information do you need to quote a forklift in Edmond?
- Make, model, year, hour meter reading, fuel type, lift capacity, mast type, and honest condition notes, plus photos of the four corners, the lowered mast, the data plate, and the hour meter. That is enough to price it accurately without a site visit.
- My forklift is on the second floor in Edmond. Can you still get it out?
- Usually, yes — freight elevators, ramps, and rigging are all part of the job. Tell us the access details up front (floor, doorway width, ceiling height, whether it rolls) so the right equipment shows up the first time.
- Do you buy pallet jacks and other material handling equipment in Edmond?
- Yes, within our lane: electric pallet jacks, walkie stackers, reach trucks, order pickers, telehandlers, and forklift attachments. We are forklift specialists and we do not buy outside material handling.
- Do you buy Jungheinrich forklifts in Edmond?
- Yes — Jungheinrich and every other major nameplate, including Toyota, Hyster, Yale, Crown, Raymond, Clark, Komatsu, CAT, Mitsubishi, and Doosan. Jungheinrich builds some of the most energy-efficient electric trucks made. Growing US presence means used demand is improving year over year.
- How fast can I get a cash offer on a forklift in Edmond?
- Within 24 hours of receiving your specs and photos, and often the same business day if you call during working hours (Monday – Saturday, 7:00 AM – 7:00 PM ET). Pickup in Edmond is normally scheduled within a few business days after you accept.
Ready for a number on your Edmond forklift?
Call (954) 740-1983 or send photos and specs. Either way you get a firm cash offer within 24 hours and we handle the pickup.
Nearby cities we buy forklifts in
- Surplus Forklift Buyers in Oklahoma City, OK
- Surplus Forklift Buyers in Midwest City, OK
- Surplus Forklift Buyers in Moore, OK
- Surplus Forklift Buyers in Norman, OK
- Surplus Forklift Buyers in Stillwater, OK
- Surplus Forklift Buyers in Enid, OK
- Surplus Forklift Buyers in Lawton, OK
- Surplus Forklift Buyers in Tulsa, OK
- Surplus Forklift Buyers in Broken Arrow, OK
- Surplus Forklift Buyers in Muskogee, OK
- Surplus Forklift Buyers in Wichita Falls, TX
- Surplus Forklift Buyers in Wichita, KS